The User can use the Gas Water heater in accordance with the changing climatic conditions be it Summer or Winter and get cold or hot water respectively.
The User can select the number of Burners according to the room temperature to get the desired Water heater temperature.
The heavy 1.2Kg copper heat exchanger will transfer the thermal energy to the water which flows around/top of the chamber effectively which results in faster heating.
After opening the hot water outlet tap the water flows out immediately, the PID will ignite the burner automatically sensing the water flow.
The Solenoid valve provided to control the flow of gas on/off automatically which gives a safety for the water heater.(In VGB612 - 2nos and VGBS610 - 1no Provided)
When the pressure of the inlet water supply is too high the PRV automatically relieves excess pressure.
The water heater will automatically cut-off the gas to ensure that gas does not leak when it flames out accidentally during the use.
The water heater will automatically cut-off the gas and stop working when the temperature of the water flowing out exceeds 80°C..
Model No. :
Rated Heat Output :
Hot water Flow rate maximum :
Battery:
Gas type and pressure:
Suitable water pressure:
Ignition:
Connection Pipe Specification : |
Gas Inlet |
Cold Water Inlet |
Hot water Inlet |
Safety Devices |
Dimensions (L x W x H) mm
VGB612
12kW
6L/min
1.5V x 2nos.
LPG - 3000 Pa
0.02 - 0.008 MPa
Automatic Electrical Pulse Ignition
1/2 Inch BSP
1/2 Inch BSP
1/2 Inch BSP
VGBS610
10kW
5.5L/min
1.5V x 2nos.
LPG - 3000 Pa
0.08 - 0.008 MPa
Automatic Electrical Pulse Ignition
1/2 Inch BSP
1/2 Inch BSP
1/2 Inch BSP
* Specifications subject to change without prior notice