Get non-stop hot water anywhere in the house while saving as much as 75-80% on your heating costs.
A solitary heat pump installed anywhere in the house can supply hot water to all the bathrooms and kitchens.
Applications
Heat pump water heaters are highly energy efficient as most of the energy for heating comes from the external environment, and only a fraction comes from electricity. Thus for 1kW electricity consumed the heat transferred will be 4kW. The amount of electrical energy needed to heat water is greatly reduced compared to a conventional electric water heater in which, for 1kW electricity consumed the heat transferred is only 1kW. Thus in heat pump water heaters the coefficient of performance (ratio of output power to input power) can be as high as 4.
HOW DOES A HEAT PUMP WORK
Major components of a heat pump water heater include a compressor, a refrigerant, two heat exchangers (a condenser and an evaporator) and an expansion valve.
The operation begins with air being forced through an evaporator which contains a liquid refrigerant, with the help of a fan.
This refrigerant evaporates to a gas and extracts heat from the ambient air.
The warm gaseous refrigerant then passes through the compressor, which increases its pressure and it becomes a hot gas.
This hot gas enters a heat exchanger (condenser) and transfers its heat to the water inside a storage tank.
The refrigerant cools down in the condenser and becomes a warm liquid.
It then passes through an expansion valve and becomes a cool liquid and enters the evaporator again.
The cycle is then repeated in this manner.
Thus heat absorbed from the air is transferred to the water and the heating continues till the desired temperature is reached.
KEY FEATURES
Split type system for flexible installation - external and internal units
Water Circulation and Technology - Safe & Reliable no mixing of refrigerant and water
Rugged and reliable rotary compressor
High energy efficiency - COP of 4.2
Intelligent automatic LCD controller to set temperature and time options
Available with 100 litres 200 litres & 300 litres tank
Enamel coated tank for water storage to withstand corrosion
Utilizes as low as 0.83 / 1.19 / 1.79 kW input; delivers heat output up to 3.5 / 5.0 / 7.5 kW
High rated pressure of 7 bar - designed to work with pressure pumps
Can be combined with a circulation pump to deliver hot water within seconds anywhere in the house
It consists of external and internal units for installation.
Utilizes as low as 0.83 / 1.19 / 1.79 kW input; delivers heat output up to 3.5 / 5.0 / 7.5 kW COP of 4.2
More savings as the operating costs are low.
Safe and reliable water circulation technology that ensures no mixing of refrigerant and water.
Manufactured in a modern, automated plant using European Technology. Protects the tank from rust and corrosion.
Intelligent automatic LCD controller to set temperature and time options.
The expansion valve is an important component in the Heat pump water heater operation.
The compressor is the heart of the heat pump operation. Rugged and Reliable rotary compressor.
The circulation pump circulates hot water from the storage tank to the heat pump to enable heat transfer.